Best Value Solutions for Process Flow Measurements

Liquid flow measurement in Process industry applications can present varied and challenging requirements and Micronics has had 35 years of experience in providing cost-effective and reliable solutions for applications in various industries including Nuclear Power, Dairy, Food Processing and the Semi-conductor industry.

There are many process liquid flows, which require a non-invasive measurement: to avoid contamination of the liquid, because of the corrosive nature of the liquid or to make ongoing servicing and maintenance easier, where this presents a challenge due to the location or critical nature of the process. In full pipe applications clamp-on, ultrasonic flow measurement is often the best solution and Micronics is the longest established UK manufacturer in this technology with a wide range of portable instrument and fixed measurement, metering products backed up by previous application experience and technical support.

Micronics has the experience of providing flow measurement and monitoring solutions for Process applications including oils, paint and water solutions, acid, paper industry slurry and a wide range of both clean and dirty water applications for full, partial pipe and open channel flows. This includes products using Ultrasonic Doppler, Transit Time and the latest Microwave technology from its partner DFTL for waste water applications.

You may need to check the performance of an existing in-line meter or investigate process flows to find out “what’s flowing where”. Micronics can provide simple to use portable instruments and for full pipe applications the best solution may be clamp-on, non-invasive flow measurement from Micronics, yes that’s right clamp-on i.e. no need to drain down systems and cut into existing pipe-work! Micronics can supply or rent a simple to use portable instrument for the initial investigations i.e. to help you build a picture of what’s going on. And as a next stage they can provide fixed clamp-on solutions to provide the essential ongoing measurement and monitoring for effective management of the application.

However, we recognise that clamp-on is not the only solution and so in areas such as Waste Water monitoring and metering we can supply a cost effective in-line solution using an advanced range of Microwave products from our partner Dynamic Flow Technology Ltd.

So if you need to measure or monitor process liquids, water or waste water flow in your industry we believe we have the solution and we would value the opportunity to discuss your requirements. Please take a look at www.micronicsflowmeters.com  and if you have any questions or specific applications you’re considering we would be pleased to provide an FOC no obligation proposal and you may also benefit from our “Try before you buy” service.

This slideshow requires JavaScript.

Please wait...

Subscribe to our newsletter

Want to be notified when our article is published? Enter your email address and name below to be the first to know.
Read previous post:
Magna Supports New G-Class with World-Class Contract Manufacturing

For nearly 40 years, the Mercedes-Benz G-Class has been built in Graz, Austria, initially by Steyr-Daimler-Puch and since 1998 under the...

Close