Martindale simplifies industrial socket testing

Socket testers provide a fast and effective solution to identify potentially unsafe installations and wiring faults.  Martindale industrial socket testers include 400V, 230V and 110V models and are now available with 16A, 32A or 63A plug types.

Simply plug-in and immediately identify wiring faults by LEDs failing to illuminate, the pattern of lit LEDs indicating the type of fault. In addition three phase models show incorrect phase connections prior to plugging in heavy duty equipment avoiding malfunctions and hazardous situations.  Clearly socket testers are not an alternative to the full verification of wiring installations, however as a first line indicator they are an essential tool for all maintenance teams.

In addition to a complete range of socket testers for polarity and fault checking of 13A wall sockets, Martindale now offers a complete range of industrial socket testers for single and 3 phase systems.

  • The CP Series for single phase industrial sockets – 230V and 110V models
  • The PC Series for 3 phase supplies – 16A, 32A, 63A models for 4 and 5 pin configurations

The Martindale CP201 is an industrial version of the classic check plug, is available with either a 16A or 32A plug to BS 4343 / IEC309.  It’s capable of identifying 28 fault conditions.  Other products in the range include the CP301 for use on 110V centre tapped circuits fitted with a yellow 110V 16A or 32A CT plug. Fault indications include Line 1, Line 2 and centre tap faults, plus Line 1 or 2 centre tap reversal.

Before carrying out any socket testing it’s important to understand what they are capable of and the different types available.  All socket testers check that the earth, live and neutral are the right way around (called polarity testing). Some offer added features – they may include a buzzer in addition to LEDs to indicate a good socket or they may show a combination of indicators to identify which particular fault type is present. There is one fault that a socket tester and indeed no other piece of equipment can easily find – the swapping of the Earth and Neutral wires. This is because the earth and neutral are common at the substation, (if not closer), so electrically they are indistinguishable.

On plugging in the tester, faults are instantly indicated by one or more of the LEDs failing to illuminate, with the pattern of lit LEDs indicating the type of fault detected. Common fault conditions can be quickly identified from the look up chart displayed on the front of the label. This approach is fail-safe in the unlikely event of any the LEDs failing to operate.

For 3 phase supplies, the PC104 and PC105 can be used for identifying 7 wiring condition faults and also confirm the phase rotation sequence with bright LED indication.

Martindale PC105 five pin 3 phase socket tester

The range of 3 Phase Industrial Socket Testers cover 4 and 5 pin socket configurations and 16, 32 and 63 amp versions are available. The testers are enclosed in a tough rubber holster to withstand harsh of on-site environments.

See infor

This slideshow requires JavaScript.

Martindale PC105 five pin 3 phase socket tester

See information on the complete range 

 

 

 

Read previous post:
The IGAsorp DVS analyzer from Hiden Isochema

The IGAsorp is a fully automated compact benchtop dynamic vapor sorption (DVS) analyzer, for fast and accurate sorption measurements using...

Close