Rack Mount AC-DC UPS Series from Powersolve provides up to 300Watts DC output power

 Power supply specialist Powersolve announces the PFD Series, a “no break” power system designed to provide constant DC power without interruption. These are 1U, 19in rack mount units designed to provide 12, 24 or 48VDC from an input voltage of 180 to 264VAC (50/60Hz).

Models in the PFD Series provide either 150W or 300W output power and can be used as both a power supply and a charging device. Batteries are external and capacity depends on output load power required and length of hold up time in the event of a power failure. The batteries can also be hot-swapped.

Every unit incorporates an intelligent interface which allows the user to

monitor the battery condition, input power condition and load status via an LED-based front panel display. Monitoring is achieved via dry contacts, RS232, USB and the optional SNMP Card which can allow computer monitoring even from a mobile phone.

For protection, the unit’s multi-channel outputs use independent fuses. Rapid response short-circuit protection limits the maximum output current which in turn prevents the fuse from blowing.

Models in the PFD Series meet the requirements of EN60950, measure 1U x 19in x 250mm deep and weigh 3.5kg (150W) and 4.5kg (300W).


About Powersolve

Since it was established in 1987, Powersolve has supplied millions of power conversion products such as AC/DC power supplies, DC/DC converters, DC/AC inverters, Battery Chargers, Batteries, Uninterruptible Power Supplies and many other products.

Based in Newbury, Berkshire, Powersolve is recognized as one of Europe’s foremost power specialists working with customers to provide the best power solution for their application. The company provides major customers in the electronics industry, communications, datacoms, telecoms, industrial, oil and gas – in fact most types of industry where there is the need for power and power conversion products. In particular, Powersolve has a lot of experience with lithium batteries and lithium battery chargers for the communication industry particularly in encrypted radio systems where Powersolve has supplied many millions of pounds worth of intelligent battery chargers used in radio communication equipment for the emergency services.

More about Powersolve at www.powersolve.co.uk

You may also like...

Read previous post:

Designed for the Engineer who needs to take quick, accurate thickness measurements, the ‘Cygnus 4+’ is a highly reliable, extremely...