Vertical Emergency Tank Shower – Se-Vts-1
An emergency tank shower for use where a constant water supply or adequate water pressure is unavailable, this emergency safety shower is fully compliant with ANSI Z358.1 providing a guaranteed 15 minutes of water flow.
ANSI Z358.1 requires that shower valves be of simple operation, turning from off, to on in one second or less, and providing hands-free operation once activated. Self-closing shower valves do not meet the ANSI standard and should be replaced.
Supported on a 40mm x 40mm x 3mm hot dip galvanised (provides corrosion protection) carbon steel, square tubular frame with bolt down fixing brackets, the moulded polyethylene 2000ltr water tank is covered in 40mm reflective Kingspan Thermapitch® TP10 rigid polyurethane foam, insulation board (0.022Wm.k thermal conductivity) and the tank structure is further protected by a shroud complete with warning signage. The heating element sits in a sump to ensure it is covered even if the tank is completely empty and the unit is fitted with a test activation handle which is accessed from outside the shower area.
Weights: | 350kg un-laden & 2350kg filled |
Heating: | 2.25 BSP, 230v 3kw rated, wired to rotary isolation switch |
Tank capacity: | 2000ltr |
Flow rate: | 75.7lpm over 15 minute duration |
Shower head: | Polished stainless steel |
Wetted parts: | Manufactured from non-ferrous materials |
Test activation handle: | Fitted outside the shower area |
Visual water level indicator: | Fitted on front face of tank shroud |
Download a datasheet for SE-VTS-1
Visit Our Website: www.tankshower.co.uk
For deliveries to all other destinations please do not order on line, contact our customer services team on 01506 430309 who will assist you.