Category Archives: PECM314

Are you looking for Elettrotec Pressure, Vacuum, Level, Temperature or Flow Switches?

Are you looking for a reliable source for your Elettrotec switch requirements? If so, look no further.

Applications Engineering Ltd has been supplying pressure and vacuum switches, encompassing many manufacturers and particularly those manufactured by Elettrotec for more than 30 years.

Chemically-resistant sensor for low liquid flow rates

Sensirion AG (Switzerland), the leading manufacturer of digital microsensors, is expanding its range of liquid flow sensors for measuring low flow rates. The new LS32‑1500 liquid flow sensor is designed for flow rates of 0-40 ml/min, extending the range of potential application areas over the successful LG16-series. A completely redesigned housing enables a compact size of 18x18x59 mm and ensures mechanical robustness.

Specialist Bolting Tool Division offer Bolting Tool Sales and IN-service Support

WORLIFTS ‘Bolting’ division can assist with almost any bolting tool or joint integrity product.  Specialising in the sale, service, repair, test and calibration of the complete range of ‘Enerpac’ bolting tools.  Worlifts are an ‘Enerpac’ genuine Level 3 accredited service centre and authorised ‘Torque Tool’ distributor so you can be assured you will get the best level of service available.

Our division delivers an on-site support service to bolting tools utilising dedicated fully equipped on-site inspection and calibration vehicles are usually mobilised and attend the customer’s sites within 24 hours, one of our competent bolting engineers will then set about putting an inspection and test plan into action.

It’s a Pallet Truck – and it’s a Crane

Specialist forklift manufacturer Sichelschmidt has supplied a wide gauge pallet truck fitted with a crane jib to a leading manufacturer of measuring and testing equipment for the automotive, aviation and electrical engineering sectors. The niche product was developed in response to the customer’s requirements for substantial reach capacity and utmost stability when feeding extremely large components to the testing plant. 

Power Quality Analysis now more affordable Applications include power logging as well as load and energy surveys

Fluke 1730 Power Quality Analyser

Fluke 1730 Three-Phase Energy Logger is 25% cheaper than earlier models

  • Simplify detection of electrical energy waste
  • Measure voltage, current, power and power factor
  • Software allows comparison of multiple data points

The new Xtreme® metal detector from Eriez® raises industry bar in terms of superior sensitivity, ease of use and reliability

Eriez Europe, UK manufacturer based in Caerphilly, South Wales, introduces the new Xtreme® Metal Detector, which surpasses previous units and competitive models alike, with enhanced features, improved sensitivity and intuitive operation. The ultra-sleek Xtreme Metal Detector combines simplicity and sophistication with its easy-to-navigate control with extra-large colour interface.

National electronics Week – Birmingham NEC 8th – 10th April 2014

Please click link to register for the National electronics Week in Birmingham @ NEC 8th – 10th April 2014

Free webinars in March cover variety of topics to enhance engineering knowledge

HBM is offering four free on-line webinars during March that examine a variety of different topics for engineers needing to be at the forefront of the latest developments in data acquisition.

The first webinar is on 11th March and takes an in-depth look at the rapidly increasing demands of vehicle testing in both mobile and bench testing applications. The aim of the webinar is to help engineers gain an insight into taking measurements and getting the results reliably and quickly to improve the effectiveness of vehicle testing. The webinar is suitable for engineers concerned with testing system components and those looking at gathering data from the complete vehicle during testing.

About Jacobsen Lenticular Tool & Cylinder Engraving Technologies Company (JacoTech)

“Global Scientific Solutions for the Development and Production of Cylindrical Polymer/Plastic Material Processing including Manufacturing of Micro Structured Optical Roll Surface Mold Components Used for the Management of Light”

JacoTech is in the optical micro-machining business of CNC diamond turning, milling, and fly-cutting unusually (big and heavy) cylinders/rolls/mandrels/drums used to either extrude/emboss/cast/calendar polymer film sheet and roll materials. These engraved molds contain simple to complex optical patterns, which perform a number of complicated light management control functions.

Increased Output and Reduced Costs in Soft Drinks Production

An increase in machine reliability and the improvement of lubrication management practices in order to maximise output in one of their plants was the objective of a globally active soft drink producer when they approached tribology expert Klüber Lubrication. One of the plant’s seven bottling lines was chosen for the improvement project. Analysis was undertaken and this developed a comprehensive lubrication plan.  Following implementation mechanical breakdown was reduced, while output increased significantly. 

Enduramaxx has for many years supplied a range of products for Industrial purposes

Enduramaxx has for many years supplied a range of products for Industrial purposes. The Enduramaxx Industrial Division continues to develop new solutions and further improve its existing range, keeping pace with a dynamic market.

Our range of high quality Industrial Tanks includes Open Top Tanks, Open Top Cone Tanks, Liquid Fertiliser Tanks, Molasses Tanks, Cone Tanks, Cone Bottom Tanks, Bunded Tanks, Silo Tanks, Mix Tanks and Cone Bottom Mix Tanks. Please make your selection from below to learn more

Can’t find what you are looking for? Then contact us! Our Custom Design & Mould Team is continually working to resolve specialised needs.

Eriez showcases Hydroflow range at MACH 2014

Caerphilly, South Wales, UK – Eriez, a leading authority in separation technologies will showcase the newly acquired division Hydroflow Europe at MACH 2014, NEC Birmingham 7-11 April 2014. Eriez Hydroflow specialises in fluid filtration and recycling systems providing support through Eriez global manufacturing affiliates and representative network.

For the first time in Europe, Eriez Hydroflow will present to the industry a live demonstration of the Star Filter® Precoat System. An innovation in vacuum element filtration, the Star Filtration System provides fine filtration of metalworking fluids achieving levels of filtration typically 3 to 5 microns.

VEGABAR series 80 – could it change the way you measure pressure?

VEGA has completely re-engineered their VEGABAR pressure transmitter family and simplified them down to just three innovative model ranges; meaning it is now much easier for the user to choose their perfect instrument from this full-range supplier of pressure technology.

These three transmitter variants can solve practically any process pressure application. VEGABAR 82 is the all-rounder: its ceramic measuring cell covers 60 to 70 % of all applications. If high temperature and resistance is required, the VEGABAR 81, with its chemical seal assembly, is the first choice. And for very high pressures, VEGABAR 83 with its metallic measuring cell is recommended.

Motorised valve actuator with optimised precision and speed – High resolution, fast and reliable

Normally, control valves for use in process control circuits are equipped with pneumatic actuators. The advantages of this design are rapid positioning speed and high resolution of the valve position, both being prerequisites in achieving a satisfactory standard of control accuracy. However, in this case the power supply can be a cause of concern since a supply of instrument quality air is needed for the actuation of the almost always required positioner. In principle, an electrical power supply would be less problematical for this purpose, but the positioning of motorised control valves is very often slow and they are subject to very high hysteresis which makes them unsuitable for many control tasks.

Sustainability Live, a free to attend exhibition takes place at the NEC on 1-3 April

Sustainability Live, a free to attend exhibition takes place at the NEC on 1-3 April and is the place to discover what’s new from across the energy, water and energy recovery industries. With the latest products and services plus seminars led by expert industry practitioners, this unique exhibition covers the whole spectrum of solutions from drainage products to drilling equipment and from the latest surveying and ground engineering products to building services – offering  you the chance to discover cutting-edge solutions to help you operate both efficiently and cost-effectively.

Accurately Detect Clear, Red, Green, Blue and Infrared Light with Industry’s Smallest IO-Link Ambient Light Sensor

 Maxim Integrated’s Santa Cruz ambient light sensor integrates the IO-Link protocol to simplify high-accuracy industrial sensing.

 Using the Santa Cruz (MAXREFDES23#) ambient light sensor (ALS) from Maxim Integrated Products, Inc. (NASDAQ: MXIM), factories can quickly configure and monitor multiple red, green, blue (RGB) and infrared (IR) ambient light sensors with the high accuracy required in industrial applications.

T Cards Direct – Use of Maintenance and Health & Safety planning boards

Use of Maintenance and Health & Safety planning boards at Tarmac Aggregate sites throughout the UK are having a major impact, enabling staff to keep on top of urgent and non urgent repairs, improving both plant operational efficiency and helping to reduce safety incidents.  At the Greenwich site in South East London, it s expected that within the first 12 months of use financial gains of around £114,00 will be made, achieved through less downtime and improved performance.