Category Archives: PECMN1213

CERTUSS Steam Generators

All CERTUSS Steam Generators are type tested according to European Pressure Equipment Guideline DGRL 97/23/EG. CERTUSS offer seven construction groups within their range of fossil fuel Generators with outputs ranging from 80kg/hr to 2000kg/hr and operating pressures of up to 32 Bar G. To accompany the Generator, CERTUSS also offer their CVE Package Plant Module, where all of the associated ancillary items are pre-piped, pre-wired and factory tested.

The new Xtreme® metal detector from Eriez® raises industry bar in terms of superior sensitivity, ease of use and reliability

Eriez Europe, UK manufacturer based in Caerphilly, South Wales, introduces the new Xtreme® Metal Detector, which surpasses previous units and competitive models alike, with enhanced features, improved sensitivity and intuitive operation. The ultra-sleek Xtreme Metal Detector combines simplicity and sophistication with its easy-to-navigate control with extra-large colour interface.

Chris Selkirk, Director of Lateral Event Design – Case Study:

When event manager and noise consultant Chris Selkirk goes on to a Festival site for the first time, in his own words, he is looking for a “win-win-win” scenario on noise measurement and compliance.

For many years Chris has been brought in by Festival organisers for his expertise in noise measurement and acoustic understanding at large outdoor events.

From the planning stages through to the round the clock cover on the day, Chris has to ensure he has the right equipment and data to assess the risks and quality of noise from the minute the first festival goer comes through the gate.

“I really want to achieve a win-win-win situation at every event where we can get more volume onsite, less volume off site but still stay within the limits of noise legislation. Getting that balance right means everyone’s happy but it isn’t easy,” he said. “You have to be able to analyse data in a live situation and respond immediately, relaying instructions via mobile phones or two-way radios.

“I would be on site 24/7 during an event, taking constant noise measurements. The data is used to either confirm or adjust the acoustics on site and this could be in various places.”

Cast Iron Welding Services Ltd


pic1 pic2

Before                           After

Large numbers of Cast Iron components are condemned to the scrap heap and expensive replacements purchased due to many engineers beliefs that the material cannot be weld repaired successfully. Cast Iron Welding Services Ltd based in Coalville, Leicestershire have built an enviable reputation and extensive customer base for the weld repair of cracks, fractures, corrosion and erosion to a variety of  components ranging from works of art, historical/heritage landmarks to critical industrial machinery.

Enduramaxx has for many years supplied a range of products for Industrial purposes

The Enduramaxx Industrial Division continues to develop new solutions and further improve its existing range, keeping pace with a dynamic market.

Our range of high quality Industrial Tanks includes Open Top Tanks, Open Top Cone Tanks, Liquid Fertiliser Tanks, Molasses Tanks, Cone Tanks, Cone Bottom Tanks, Bunded Tanks, Mix Tanks and Cone Bottom Mix Tanks. Please make your selection from below to learn more.

Quality packaging for a quality product!

Every family has costs on preventative or essential medicines.
We all try to protect ourselves and our loved ones from illnesses and all types of maladies, but, unfortunately, we all face situations when we just cannot do without medicines

Calgon Carbon Awarded 10-Year Contract for Reactivation Services

Pittsburgh, PA — August 1, 2013 – Calgon Carbon Corporation (NYSE: CCC) and its European operating group, Chemviron Carbon, announced that Thames Water (Thames), the largest provider of drinking water and wastewater services in the U.K., has awarded Chemviron a 10-year contract to reactivate spent activated carbon used to treat drinking water. The value of the contract is dependent upon the amount of carbon that is reactivated annually, which is expected to be approximately 11 million lbs (5,000 MT).

Create – Connect – Share: new opportunities for cutting food products

The FAM Stumabo UK Open Week took place from the 4-8 November 2013 for the third consecutive year running.  The purpose of our Open Week is to raise awareness of the opportunities it creates in advising and updating customers both current and new. Participation in regards to machine testing was encouraged and was free and open to everyone who attended. 

Presspart rebook for Blechexpo 2015

Presspart Manufacturing, one of the world’s leading suppliers of high volume, precision deep-drawn components for industries, has confirmed it will once again be exhibiting at Blechexpo in 2015.

AKO UK Expand their Pinch Valve range with the New VMC Series


The new VMC series is based on a multi-functional modular system which enables flexible exchange of the two types of body available – aluminium and stainless steel, and also a wide range of different collar caps/flange types – stainless steel and POM.

NORD presentation at logistics exhibition focuses on intelligent drive concepts

Bargteheide – At the LogiMAT 2014 exhibition, NORD DRIVESYSTEMS will showcase economic mechatronic drive systems consisting of two-stage helical bevel gear units, high-efficiency motors, and decentralized drive electronics. Their functional range is scaled according to the application: the electronic starter SK 135E enables constant speed as well as reversing operation.

Free-Way 6 Position Toggle Switch Re-design

The new Free-Way Switch Range opens up an entirely new dimension in guitar pickup selection and potential for other applications. The 6 position lever switch in its conventional form provides 2 pole 6 position circuit selection with the ability to select any of the 6 positions non sequentially if required, unlike a conventional rotary switch approach.

Redundancies at major process engineering companies expected soon.

Large numbers of condition monitoring alarms are expected to be made redundant after plant maintenance regimes benefit from the use of the new Fixturlaser NXA Pro Laser shaft alignment system.

Hydra-Cell Mono-Block Pumps Ease Installation & Service

Wanner International has introduced an optional Mono-Block style pump head on its Hydra-Cell G03, G13 and P200 seal-less pump models.

The new Mono-Block pump head combines the traditional valve plate and manifold into a single component, allowing easy access to the cartridge style valve assemblies. The valves are accessed easily without the need to disassemble the pump or disturb the system pipework.

Ex-Protected Materials Handling from Sichelschmidt

When it comes to materials handling in potentially explosive environments, safety is paramount, and German manufacturer Sichelschmidt, which celebrates its 100th anniversary in 2014, has been the market leader in the particularly demanding field of Ex-protection technology for decades.


Assembly operations in every industry require precision tools that drive home all types of fixings securely – screws, bolts, nuts, studs – all need to be tightened to the correct torque. Every time without exception.

Makita production tools are extensively used in the vehicle manufacturing world, for construction plant assembly and for domestic goods and process equipment assembly.